top of page

CAT 320 vs. Hyundai HX220L vs. Komatsu PC210LC-11: Mid-Size Excavators Compared

Nov 7
4 min read

Ask ten excavator operators which 20-ton class machine they would buy with their own money and you will get three or four different answers, and three brands come up more than any others: CAT's 320, Hyundai's HX220L, and Komatsu's PC210LC-11. All three compete directly for the same general excavation, utility, and site-development work, and all three get cross-shopped constantly by contractors trying to stretch a six-figure purchase or lease as far as it will go. Here is how they actually compare on the numbers that matter on a real jobsite.

Operating Weight and Engine Power

The CAT 320 runs an operating weight around 48,500 pounds with roughly 157 net horsepower from its C4.4 engine. The Komatsu PC210LC-11 lands slightly heavier at roughly 50,089 pounds with 165 net horsepower. The Hyundai HX220L is the heaviest and most powerful of the three at roughly 52,117 pounds and 173 net horsepower (182.6 gross), reflecting Hyundai's tendency to spec its mid-size machines a notch bigger within what is still marketed as the same general size class. More weight generally means more stability and lift capacity on uneven ground, but it also means a heavier trailer load and marginally higher fuel burn per hour, so the right answer depends on whether a contractor's work is digging-intensive or lift-and-carry intensive.



Dig Depth and Reach

On its standard boom and stick configuration, the CAT 320 digs to roughly 22 feet with a maximum reach along the ground near 32.3 feet. The Komatsu PC210LC-11 ranges from about 20 to 21.7 feet of dig depth and 30 to 31.8 feet of reach depending on which arm length is specified. The Hyundai HX220L spans the widest range of any of the three because Hyundai offers more boom and stick combinations, from a 19.1-foot dig depth and 29.4-foot reach on its base configuration up to 25.3 feet of depth and 35.3 feet of reach on its longest optional setup. For a utility contractor digging deep, narrow trenches, that extended-reach HX220L configuration is worth a serious look; for general grading and loading work, the standard configurations on any of the three will cover most day-to-day tasks.


Bucket Capacity and Everyday Digging Feel

The CAT 320 carries the largest standard bucket of the three at roughly 1.56 cubic yards, which pairs with its lighter overall weight to make it feel quick and responsive on cycle times, a trait CAT has leaned into across the 300 Next Gen excavator lineup. The Hyundai HX220L runs a smaller standard bucket around 1.2 cubic yards but compensates with more horsepower and digging force, favoring harder ground and denser material. Komatsu does not publish a single universal bucket figure for the PC210LC-11 in the same simple way, since its lineup is configured more heavily around application-specific bucket packages, but it sits in the same general capacity range as the other two once matched to comparable ground-engaging tools. None of the three is dramatically undersized or oversized for general excavation; the real differentiator is how each brand's hydraulic system delivers that digging force.


Dealer Network, Parts Availability, and Resale

On paper, all three machines will dig a footing or load a truck equally well in the hands of a competent operator. The practical differences that actually decide a purchase for most contractors come down to dealer density, parts lead time, and resale value in a specific region. CAT's dealer network remains the deepest in North America, which matters most to a contractor in a rural market far from a dealership. Komatsu and Hyundai have both built out stronger regional coverage over the past decade, and both now compete credibly on parts availability in most metro markets, which narrows what used to be CAT's biggest practical advantage.


Rent vs. Own at the 20-Ton Class

A mid-size excavator in this class is the single most-used machine on most general contracting and site-development fleets, which is exactly why renting one long-term rarely pencils out. A contractor running this size excavator more than a handful of weeks a year is almost always better off owning, because daily and weekly rental rates on a 20-ton machine add up fast against a structured monthly payment, and ownership lets a crew keep the exact bucket, coupler, and attachment setup they have already dialed in rather than re-adapting to whatever a rental yard has available.


Who Fits Which Machine

  • General excavation and grading contractors who want quick cycle times and the deepest dealer network: CAT 320.

  • Utility and underground contractors needing maximum reach and depth for trench work: Hyundai HX220L with an extended boom/stick configuration.

  • Site-development contractors balancing power and fuel efficiency across mixed digging and loading work: Komatsu PC210LC-11.


Excavator Financing That Matches the Machine You Actually Picked

Excavator financing through BFC covers any of the three machines above, new or used, for startups and existing businesses nationwide, any credit profile. Whichever brand wins the comparison for your specific work, the financing structure should fit your cash flow, not the other way around. For more on how attachment choices change the economics of a machine like these, see our piece on quick couplers and hydraulic thumbs, and our look at the CAT 325's Heavy Duty undercarriage option. Visit our excavator financing hub for the full overview.


Ready to Finance Your Next Excavator?

Visit our home page to learn more about BFC, apply for financing today, browse our equipment for sale and financing inventory, or subscribe to our blog for more equipment-financing insight like this.

Comments


bottom of page