Hyundai's HX60A: The Zero-Tail-Swing Compact Excavator Rounding Out the HX-A Lineup

Sep 30

3 min read

We've written about several members of Hyundai's HX-A compact excavator family on this blog, but the HX60A, the largest machine in that eight-model line, has quietly never gotten its own dedicated look. That's worth fixing, because at 65.9 net horsepower and 13,404 pounds of operating weight, the HX60A sits at a genuinely useful spot in the lineup: big enough to move real dirt, small enough to still fit through a standard construction gate.

Real Specs From Hyundai's Own Spec Sheet

Hyundai lists the HX60A with a Hyundai DM02VB engine producing 65.9 hp at 2,400 rpm, an operating weight of 13,404 pounds, and a standard bucket capacity of 0.24 cubic yards. Maximum digging depth runs 12 feet 4.4 inches, with a maximum digging reach of 20 feet 2.1 inches. Bucket breakout force comes in at 9,462 pounds and arm crowd force at 6,363 pounds, both real numbers that tell you this machine can genuinely dig, not just scratch the surface.

The number that actually matters most for tight-access work is the tail swing radius: 5 feet 5 inches. That's a compact footprint that lets the HX60A rotate a full 360 degrees close to a fence line, a building foundation, or parked equipment without the counterweight sweeping into anything behind it, which is the entire reason this class of machine exists.

Where the HX60A Sits in Hyundai's Lineup

Hyundai's HX-A compact excavator series runs from the roughly 2,000-pound HX17AZ up through the HX60A at the top, giving contractors real granularity in sizing rather than forcing a jump straight from a mini excavator into a full 10-ton machine. The HX60A is the honest answer for a crew that's outgrown a 4 or 5-ton compact excavator but still needs the zero or reduced-tail-swing geometry that lets them work inside property lines, alongside structures, or in backyards where a standard-swing excavator simply won't fit without damaging something on the way around.

Who Runs This Class of Machine

Residential and light commercial site contractors digging foundations, footers, and utility trenches inside fenced lots are the core audience here. Landscaping and hardscape crews installing drainage, retaining walls, and pool excavations in established neighborhoods need exactly this combination of digging depth and tight footprint. Utility subcontractors running water and sewer laterals in older neighborhoods with narrow easements, and demolition crews working small structures on tight urban lots, round out the list of trades where a standard 8 to 10-ton excavator is simply the wrong tool for the access constraints on site.

Rent-vs-Own for a Machine This Versatile

A compact excavator in the 6-ton class is versatile enough to stay busy across residential, landscape, and light utility work simultaneously, which makes it one of the worst machines to keep renting instead of owning. If you're pulling a machine this size off a rental yard for more than a handful of jobs a year, the math has already flipped in favor of ownership. Every rental invoice on a machine you use this often is money that builds nothing, while financing the HX60A puts the same recurring cost toward equity in a machine that's sitting on your trailer, ready the moment a tight-access job comes in, instead of waiting on whatever the rental yard has left.

BFC doesn't make you wait years until one machine is fully paid off before financing the next. If your crew needs a second compact excavator, a skid steer, or a dump truck while the HX60A is still on the books, we can help you keep growing instead of putting expansion on hold.

Financing a Compact Excavator in South Florida

Miami-Dade and Broward's dense, fenced residential lots and narrow utility easements are exactly the environment a zero-tail-swing 6-ton excavator was built for. If you're researching excavator financing in Florida for a machine this size, the practical case writes itself once you're running enough tight-access jobs to keep it busy: this class of equipment holds its resale value well precisely because so many contractors need one occasionally but so few own one outright.

For a direct spec comparison against a well-known competitor in the same weight class, see our Hyundai HX60A vs. CAT 308 CR comparison, and if a reduced-tail-swing machine with more reach and depth is what you actually need, our Hyundai HX130A LCR spotlight covers the next size up in Hyundai's lineup.