New Holland C237 vs. Hyundai HT100V: Mid-Size Compact Track Loader Comparison

New Holland's C237 and Hyundai's HT100V sit in almost the exact same mid-size compact track loader bracket, and this is a pairing that's never been put side by side despite both brands having built genuinely solid machines in this weight class for years. Both run right around 9,750-9,950 lbs, both deliver roughly 68-70 horsepower, and both are built for the contractor who's outgrown a small-frame CTL but doesn't need the size, weight, or price of a flagship large-frame machine. This is the class that does the bulk of everyday material handling, pallet work, and general-purpose loading on a typical construction site.

New Holland C237: Vertical Lift With Real Lift Capacity

New Holland's C237 delivers 68 net horsepower at 2,500 rpm with a pump flow of 24.2 gpm, built around a vertical-lift boom geometry that keeps the bucket pin high and reaching outward at full height — ideal for loading trucks and dumpsters rather than working close to the ground. Operating weight runs approximately 9,945 lbs, with rated operating capacity of 2,597 lbs at 35% of tipping load or 3,700 lbs at the more aggressive 50% rating, against a 7,400-lb tipping load. Bucket cylinder breakout force comes in at a strong 8,767.6 lbs, giving the C237 genuine muscle for a mid-size machine.

Hyundai HT100V: A Comfortable, Capable Mid-Size Option

Hyundai's HT100V runs 69.7 net horsepower at 2,400 rpm — marginally ahead of the New Holland — with an operating weight of 9,755 lbs, keeping it about 200 lbs lighter than the C237. Rated operating capacity comes in at 2,300 lbs at a 35% tipping-load rating, built on the same sturdy platform Hyundai uses across its compact loader skid steers, with additional undercarriage reinforcement specific to the stresses a track loader sees that a wheeled skid steer doesn't. Hyundai has put the HT100V through the same rigorous cycle, heat, vibration, and shock-load testing regimen that defines the rest of its construction equipment lineup.

Rated Operating Capacity: New Holland's Real Edge

New Holland holds a meaningful advantage here: 3,700 lbs of rated operating capacity at the 50% tipping-load standard versus Hyundai's 2,300 lbs at 35%. Even accounting for the different rating standards each brand publishes, the C237's higher bucket breakout force and heavier overall chassis translate into more usable lift and push capacity for pallet work, material handling, and bucket grading. For contractors moving palletized materials or heavy landscape supplies regularly, that extra rated capacity directly affects how many trips a job takes to complete.

Which Contractors Should Lean Which Way

General contractors and material handling-heavy operations — moving pallets of block, brick, bagged materials, or landscape supplies — will get more value from New Holland's higher rated operating capacity and breakout force. Contractors running a broader mix of general-purpose loader work, where a slightly lighter machine with strong horsepower covers most daily tasks, will find Hyundai's HT100V a capable, well-built alternative backed by the same steel-manufacturing quality control that defines the brand's excavator lineup. Both machines are versatile enough to serve as a primary loader for a small-to-mid-size contracting operation.

Hydraulic Flow and Attachment Capability

New Holland's 24.2 gpm pump flow on the C237 (with a 39.9 gpm high-flow option available) covers the full range of standard and higher-demand attachments — augers, cold planers, mulching heads — without starving performance. Hyundai's HT100V runs a comparable standard flow rate suited to buckets, forks, grapples, and augers, the core attachment lineup most mid-size CTL owners actually use day to day. For a contractor planning to run high-flow attachments regularly, New Holland's optional high-flow package is worth specifying up front rather than retrofitting later.

Undercarriage and Ground Pressure

Both machines run rubber-tracked undercarriages appropriate to their weight class, with New Holland's slightly heavier chassis offset by a correspondingly wider track footprint to keep ground pressure manageable at 4.4 psi. Hyundai's lighter HT100V naturally runs somewhat lower ground pressure simply by weighing less, an advantage on soft, sandy, or recently-graded Florida fill where protecting the finished surface matters as much as the machine's raw lifting numbers. Neither undercarriage is a weak point at this size class; both are built for daily commercial use rather than occasional light-duty work.

Serviceability, Warranty, and Dealer Support

New Holland and Hyundai have both invested heavily in expanding Florida dealer coverage in recent years, which matters more than almost any spec when a hydraulic hose or track component needs same-week replacement to keep a job on schedule. Both back these mid-size CTLs with standard multi-year warranty coverage, and aligning the financing term to that warranty window — rather than simply taking the longest available term — protects a contractor from exposure to major-component repair costs in the later years of a loan.

Attachment Ecosystem and Daily Versatility

Both machines support the standard range of skid steer and CTL attachments through universal quick-attach systems — buckets, pallet forks, grapples, augers, and brush cutters — making either a capable single-machine solution for a contractor who needs one loader to cover material handling, light grading, and site cleanup across a given day. New Holland's optional high-flow hydraulic package extends that versatility further into cold planers, mulching heads, and other higher-demand attachments that a standard-flow machine can't run at full output. For a contractor who anticipates adding attachments beyond the basics over time, specifying the high-flow option up front on the C237 avoids a costly retrofit down the road.

Warranty Coverage and Financing Term Alignment

Both New Holland and Hyundai back these mid-size compact track loaders with standard multi-year warranty coverage appropriate to commercial daily use, and both occasionally run promotional extended-coverage offers tied to dealer financing programs. When financing either machine, matching the loan term to the warranty window and expected duty cycle — rather than defaulting to the longest term offered — protects a contractor from exposure to major-component repair costs in the later years of the note, right when the machine is working hardest to earn its keep.

Resale Value and Fleet Standardization

New Holland's established presence in the compact track loader category gives the C237 a reasonably deep used-equipment market, supporting predictable resale value for a contractor planning to trade up in a few years. Hyundai's growing installed base in North American construction markets means a smaller but increasingly active pool of buyers for a used HT100V, with the brand's expanding dealer network helping close that gap over time. For a contractor already running other equipment from either brand, standardizing controls and parts sourcing across a growing fleet is a real, if understated, value beyond the individual machine's specs.

Safety and Visibility for Material Handling Work

Loading trucks, stacking pallets, and working around ground crews guiding material placement all demand clear operator sightlines, and both machines are designed with that in mind. New Holland's vertical-lift geometry on the C237 keeps the load visible through more of the lift cycle than a radial-lift design would, directly aiding safe truck-loading and stacking work. Hyundai's HT100V cab emphasizes the same visibility priorities the brand carries across its excavator and loader lineup, with sightlines designed to keep the bucket and swing area visible to the operator throughout a full range of motion.

Fuel Efficiency and Operating Hours

Both machines run diesel engines sized appropriately for a mid-size CTL's typical duty cycle, and fuel cost per operating hour tracks closely between the two given their similar horsepower ratings. Hyundai's slightly lighter chassis gives the HT100V a marginal efficiency edge under light-to-moderate load, while New Holland's higher operating capacity on the C237 can mean fewer total trips to move the same volume of material — which, across a full year of daily material handling, often matters more to total fuel cost per job than the per-hour burn rate of either engine alone.

Transport and Jobsite Mobility

At roughly 9,750-9,950 lbs, both machines move easily on a standard tandem-axle equipment trailer behind a 3/4-ton or 1-ton pickup, without crossing into the heavier commercial trailering thresholds that larger CTLs and skid steers require. That keeps either machine practical for a contractor moving between two or three jobsites in a single day, a common pattern for general contractors and landscape companies running a mixed schedule of smaller residential and light-commercial work rather than staying on one large site for weeks at a time.

Undercarriage maintenance on both machines follows a similar schedule, with track tension checks recommended more frequently for contractors working consistently on abrasive sand, shell rock, or recently-placed fill common across much of Florida, compared to the standard interval built around denser, more established soils.

Down Payment and Loan Structure Considerations

A reasonable down payment on either the C237 or HT100V reduces total interest paid and shortens the path to real equity in the machine, while a loan term matched to the contractor's typical material-handling job volume keeps monthly obligations proportionate to the revenue this size CTL actually generates across a working year.

The Rent-vs-Own Math on a Mid-Size CTL

Mid-size compact track loaders see constant rental demand because they're genuinely useful across almost every job type a general contractor or landscaper handles, which is exactly the situation where ownership pays for itself fastest. Every week spent renting instead of owning is a week of lost equity, and equipment financing structured around a contractor's real job volume converts that recurring cost into a working asset on the balance sheet. For a contractor running a mid-size CTL as a daily-use machine, ownership typically pencils out well within the first operating season.

BFC finances both New Holland and Hyundai dealer networks across Florida, and we understand the cash-flow rhythms of contractors who depend on this size machine for daily material handling. If you're ready to explore equipment loans for a C237 or HT100V, or want to browse our equipment for sale inventory, reach out and we'll walk through your options.

The Bottom Line

New Holland's C237 wins on rated operating capacity, breakout force, and a high-flow hydraulic option for demanding attachments. Hyundai's HT100V wins on lighter weight, slightly more horsepower, and a steel-build durability pedigree that's earned trust across the brand's construction equipment lineup. Both are solid, genuinely capable mid-size compact track loaders worth financing for a contractor running daily material handling and general loader work.

Ready to move forward? Visit our home page to learn more about BFC, apply for equipment financing for a New Holland C237 or Hyundai HT100V, browse our equipment for sale and financing inventory, or subscribe to our blog for more comparisons like this one.